Home The console

Powered by Dragon Q8B. Everything forged around it.

We are designing MUN as a console you want to switch on, pick up and make room for at home. Dragon Q8B provides the computing power. Our work is giving it a form of its own, from placing a game in its cradle to the path air takes through the case.

Current design · model v112 Materials and sizes subject to prototype validation.

MUN / v112 · Drawing of the design in development

The care is in how it feels to use.

The lid you open to place a game. The aluminium button, slightly recessed. Screws in metal inserts so the case can be opened again. We want to give the same care to the things you feel with your hands when you look away from the screen.

Lid open at 45°

MUN Disk

Open, place, play.

Open the lid and the game is in sight, in its bed, right above the board. It is read by a reader we are developing for MUN, with its own connector.

Disc
Ø 60 × 4.2 mm
Bed
Ø 82.4 mm
Opening
45°, spring hinges
Reader
Over M.2, in development
Smoked front
Front elevation

Display and sound

A display behind the smoke.

The display sits behind the smoked front, inside the continuous frame the case gives the front. The speaker is right below it.

Display
OLED, 60.5 × 19 mm glass
Front
Smoked polycarbonate, glossy
Speaker
30 × 20 mm, with amplifier
ButtonRecessLid
Detail · front left corner

Power

Power, in metal.

Half a millimetre down in its recess, in the lid’s front left corner.

Material
Aluminium 6061-T6
Finish
Bead-blasted, graphite anodized
Size
Ø 8.8 mm

128.9 mm

Side elevation

Case

Two pieces, closed from below.

The lid comes off the body from below, and its screws thread into metal inserts, not into the plastic. Outside, tapering chamfers and a continuous frame around the front.

Size
179.4 × 128.9 mm
Closure
4 screws from below
Feet
Turned aluminium, polished, anodized
179.4 mm × 128.9 mmRadxa Dragon Q8BRadxa Dragon Q8BMUN Disk bed, Ø 82.4 mmConnections panelDisplay and speakerSide coversDust filter
179.4 mm × 128.9 mmRadxa Dragon Q8B
  • Radxa Dragon Q8B
  • MUN Disk bed, Ø 82.4 mm
  • Display and speaker · at the front
  • Connections panel · at the back
  • Side covers
  • Dust filter
Inside · a plan diagram, to scale

Inside

Made to breathe.

Air comes in through the floor, crosses the board’s tray through its duct to the heatsink and leaves through the sides. For cleaning, the side covers and the dust filter come off.

Board
Radxa Dragon Q8B
Heatsink
Radxa’s official one
Plate
0.5 mm aluminium, pads over the SSD
Rear elevation

Connections

Everything, at the back.

Everything you plug in comes out at the back, through one panel with an opening made to measure for each connector.

  1. Ethernet ×2
  2. USB-A ×4
  3. HDMI
  4. USB-C · power
  5. Headset
Panel
Aluminium 6061-T6, bead-blasted, graphite anodized

At the centre

Snapdragon inside. MUN in every detail.

Snapdragon 8cx Gen 3 combines eight CPU cores with Adreno 690 graphics. Around that foundation we are designing the cooling, the disc reader and the console’s operating system. What games can do with them is the next thing to put to the test.

Processor
8 cores

Snapdragon 8cx Gen 3: four Kryo Prime up to 3.0 GHz and four Kryo Gold up to 2.4 GHz.

Graphics
Adreno 690

With Vulkan 1.3, OpenGL ES 3.2 and OpenCL 2.0.

Memory
128 bits

LPDDR4x, in eight 16-bit channels.

Board capabilities as specified by Radxa. These are not game performance measurements on MUN; the final configuration is still in development.

View the full specifications
Specifications of the Radxa Dragon Q8B
Radxa Dragon Q8BData sheet · Radxa’s figures
Processor
8 coresSnapdragon 8cx Gen 3: four Kryo Prime up to 3.0 GHz and four Kryo Gold up to 2.4 GHz.
Graphics
Adreno 690With Vulkan 1.3, OpenGL ES 3.2 and OpenCL 2.0.
Memory
128 bitsLPDDR4x, in eight 16-bit channels.
Picture
4K at 120 HzBoard HDMI output and video decoding up to 4K at 120 Hz; not a game resolution or frame-rate claim.
Process
5 nmThe process the Snapdragon 8cx Gen 3 is made in.
Original Radxa specifications ↗

MUN’s memory and storage are not settled yet. MUN Dev, our development platform, uses a Radxa Dragon Q6A and has no MUN Disk reader; MUN OS runs on it with an experimental profile, and no image of it is published.

We are shaping the console. Your game could be part of it.

Create for MUN →